The X-NUCLEO-IDW01M1 is a Wi-Fi evaluation board based on the SPWF01SA module, which expands the STM32 Nucleo boards. The CE, IC and FCC certified SPWF01SA module has an embedded STM32 MCU, a low-power Wi-Fi b/g/n SoC with integrated power amplifier and power management and an SMD antenna. The SPWF01SA module is also equipped with 1 MByte of external FLASH for firmware update over-the-air (FOTA). The firmware features a complete software IP stack to open up to 8 TCP/UDP sockets, as well as dynamic web pages with SSI to interact with the module and a REST API (get & post) for conveniently transferring files to/from servers in the cloud. The module can simultaneously behave as a socket server and socket client. The firmware supports secure sockets with TLS/SSL encryption, ensuring secure end-to-end communications with the cloud, with or without authentication. The module operates as a client STA, IBSS, or miniAP (with up to 5 client STAs). The X-NUCLEO-IDW01M1 interfaces with the MCU on the STM32 Nucleo board via the UART serial port; the user can easily access the stack functions using the AT command. X-NUCLEO-IDW01M1 is compatible with both the ST morpho and Arduino UNO R3 connector layout.
X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
SPWF01SA module major characteristics:
low power IEEE 802.11 b/g/n transceiver
integrated SMD antenna
STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
1 MByte extended flash for FW update over the air (FOTA)
integrated protocol stacks: TCP/IP, TLS/SSL
application layer functions: web server supporting dynamic web pages, REST API to get & post web content
WEP/WPA/WPA2 personal security
system modes: station, IBSS, and miniAP
16 configurable GPIOs available
simple AT command set host interface through UART
compatible with STM32 Nucleo boards
equipped both with ST morpho connector and Arduino UNO R3 connectors
scalable solution; it can cascade multiple boards for larger systems
free development firmware library and examples, compatible with STM32Cube
Your registration has been successfully submitted!
To validate your e-mail and start the download, please click on the link inside the e-mail that has been sent to you. This link will be valid for 24 hours. Please check your spam filters in case you did not receive the e-mail.
The e-mail address that you have entered during the download attempt has not yet been validated. Please check your inbox for the e-mail with the download link. In case you did not receive the e-mail, or you entered a wrong e-mail address, you can start-over the process.