3D printer controller for FFF/FDM printer :The most performing board in the world: High speed-High acceleration-high accuracy. Flexibility , working on 3d printer, CNC, laser engraver, robotic arm, scara robot.
STSPIN220 click is a stepper motor driver with the PWM current control and selectable microstepping up to 256 microsteps. It is based on the STSPIN220, a low voltage stepper motor driver from STSPIN2 series.
6DOF IMU 8 click is an advanced 6-axis motion tracking Click board™, which utilizes the ISM330DLC, a high-performance System in Package (SiP), equipped with a 3-axis gyroscope, and a 3-axis accelerometer.
AudioMUX click is a sound processing Click board™ with digital controls, based on the TDA7468D IC. It can be used to select one of four audio input channels, adjust its frequency response and volume, and send it to the output.
Charger 2 click is a LiPo/Li-Ion battery charger with the additional monitoring IC onboard. It carries the STBC08, a standalone linear battery charger IC and the STC3100, a battery monitor IC with Coulomb counter/gas gauge.
This Sensor Node board - 100% ST components inside - facilitates and speeds up development of smart sensor applications, providing several connectivity options, including Bluetooth Smart and sub-GHz 6LoWPAN.
The Step Down 2 click is a Click board? equipped with the L6986HTR, a synchronous step-down switching regulator with operating input voltages from 4V to 38V and output voltage adjustability ranges from 0.85 V to VIN.
Macronix delivers high quality, innovative and performance driven range of Non-Volatile products such as NOR Flash SLC NAND Flash and eMMC, ideal for diverse applications from computing, consumer, networking to industrial, automotive, and Internet of Things. A wide product offering suitable for Data and Code storage, Execution-in-Place and Energy-efficient applications
NFC Tag 4 Click is NFC tag device, offering 16 Kbit of electrically erasable programmable memory (EEPROM). This Click Board™ offer two communication interfaces. The first one is an I2C serial link and can be operated from a DC power supply.
LightRanger 8 Click is a compact add-on board that contains a ranging sensor with multi-target detection. This board features the VL53L3CX, the latest Time-of-Flight (ToF) product that embeds third-generation FlightSense patent technology.
Accel 10 Click features an ultra-low power triaxial "femto" accelerometer sensor with embedded intelligence, which allows linear motion and gravitational force measurements in ranges of +/-2 g, +/-4 g, +/-8 g and +/-16 g in three perpendicular axes.
RFid click features CR95HF 13.56 MHz contactless transceiver as well as trace antenna. The click is designed to run on a 3.3V power supply only. It communicates with the target MCU via mikroBUS™ UART (TX, RX), SPI (MISO, MOSI, SCK, CS) INT, RST, PWM and AN lines.
Wurth Elektronik EMC / Filter products are ideal to solve all electromagnetic interferences. For example filtering of data, power and communication lines, common and differential noise suppression on wire or PCB.
Accel 3 click carries the H3LIS331DL a low-power high-performance 3-axis linear accelerometer. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line.
AP Memory IoT RAM solution is the ideal solution, specifically when the application memory needs exceed the SRAM embedded in the selected STM32 MCU, when requirements deals with ultra low power, low density, high performance, and competitiveness.
Barometer 2 Click is a digital barometer on a Click board™. Barometer 2 is equipped with the LPS35HW, an absolute piezoresistive pressure sensor with ceramic, water resistant package, manufactured using a proprietary technology.
3D Hall 3 click is a very accurate, magnetic field sensing Click board™, used to measure the intensity of the magnetic field across three perpendicular axes. It is equipped with the LIS2MDL, a low power 3D magnetic sensor.
VReg click is a digitally controlled DC Voltage regulator in mikroBUS™ form factor. The design is based on the well-known LM317-M circuit, with the addition of a 12-bit DAC, 12-bit ADC, and an Operational Amplifier. Two pairs of screw terminals serve as inputs and outputs.
9DOF click carries ST's LSM9DS1 inertial measurement module that combines a 3D accelerometer, a 3D gyroscope and a 3D magnetometer into a single device outputting so called nine degrees of freedom data.